https://www.ruijienetworks.com/products/switches/campus-switches/rg-cs86-20xs4vs2qxs-d
| Özellik | Açıklama |
|---|---|
| Port Özellikleri | 20 x 1GE/2.5GE/10GE SFP+ portları, 4 x 10GE/25GE SFP28 portları, 2 x 40GE QSFP+ portları |
| Modül Yuvası | 2 x güç modülü yuvası, 2 x fan güç modülü yuvası |
| Güç Modülü | RG-PA150I-F |
| Fan Modülü | M1SFAN I-F (2 önceden takılı) |
| Yönetim Portları | 1 x RJ45 konsol portu, 1 x RJ45 MGMT portu |
| USB Portu | 1 x USB portu |
| Paket Yönlendirme Hızı | 570 Mpps |
| Anahtarlama Kapasitesi | 760 Gbps |
| Bellek | 1 GB RAM, 1 GB Flash bellek |
| MAC Adresi Tablosu | 32,768 |
| IPv4 Yönlendirme | 16,000 IP yönlendirmesi |
| IPv6 Yönlendirme | 16,000 IPv6 yönlendirmesi |
| Boyutlar (En x Derinlik x Yükseklik) | 440 mm x 330 mm x 43.6 mm (1U) |
| Ağırlık | 4.6 kg (boş kasa, 2 fan modülü ile) |
| Güç Tüketimi | Maksimum 85 W |
| Çalışma Sıcaklığı | 0°C ile 50°C arasında (32°F ile 122°F) |
| Fan Modülü Yedekliliği | 1+1 yedeklilik |
| Güç Modülü Yedekliliği | 1+1 yedeklilik |
| MTBF (Hata Süresi) | 200,000 saat (yaklaşık 22 yıl) |
| Güvenlik | SSHv1, SSHv2, HTTPS, RADIUS, TACACS+, 802.1X Port ve MAC tabanlı kimlik doğrulama |
| Yedeklilik ve Güvenilirlik | Güç modülü, fan, sıcaklık ve güç izleme ile yedekleme ve alarm özellikleri |
| Akustik Gürültü | ≤ 78 dB |
| Sertifikalar | IEC 62368-1, EN 300386, EN 55032, EN 55035, EN IEC 61000-4 serileri |
| Ağ İzleme ve Yönetim | SNMP v1/v2/v3, sFlow, NETCONF, gRPC, Cloud ve SON desteği |
| Hardware Specifications | |
| Port Specifications | RG-CS86-20XS4VS2QXS-D |
| Fixed service port | 20 x 1GE/2.5GE/10GE SFP+ ports |
| 4 x 10GE/25GE SFP28 ports | |
| 2 x 40GE QSFP+ ports | |
| Note: One switch provides a maximum of 32 x 10GE ports. | |
| Module slot | 2 x power module slots |
| 2 x fan power module slots | |
| Power module | RG-PA150I-F |
| Fan module | M1SFAN I-F (pre-installed 2) |
| Fixed management port | 1 x RJ45 console port |
| 1 x RJ45 MGMT port | |
| USB | 1 x USB port |
| System Specifications | RG-CS86-20XS4VS2QXS-D |
| Packet forwarding rate | 570 Mpps |
| Switching capacity | 760 Gbps |
| BootROM | 16 MB (storing boot software for 1+1 boot redundancy) |
| Flash memory | 1 GB (storing boot software for 1+1 boot redundancy) |
| Memory | 1 GB |
| MAC address table size | 32,768 |
| ARP table size | 16 |
| Number of IPv4 unicast routes | 16 |
| Number of IPv4 multicast routes | 4 |
| Number of IPv6 unicast routes | 16 |
| Number of IPv6 multicast routes | 2 |
| Number of ACEs | In: 2,500 |
| Out: 1,000 | |
| Number of VSU members | 2 |
| Dimensions and Weight | RG-CS86-20XS4VS2QXS-D |
| Unit dimensions (W x D x H) | 440 mm x 330 mm x 43.6 mm (17.32 in. x 12.99 in. x 1.72 in.) |
| Shipping dimensions (W x D x H) | 545 mm x 500 mm x 232 mm (21.46 in. x 19.69 in. x 9.13 in.) |
| Rack height | 1 RU |
| Unit weight | 4.6 kg (10.14 lbs) (empty chassis with 2 fan modules) |
| Shipping weight | 6.40 kg (14.11 lbs) (empty chassis with 2 fan modules) |
| Power Supply and Consumption | RG-CS86-20XS4VS2QXS-D |
| Power supply | 2 x pluggable power modules |
| Power module redundancy | 1+1 power redundancy |
| Power input | RG-PA150I-F (AC input): |
| ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz | |
| ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz | |
| ● Maximum input current: 3 A | |
| Maximum output power | RG-PA150I-F: 150 W |
| Maximum power consumption | 85 W |
| Environment and Reliability | RG-CS86-20XS4VS2QXS-D |
| Temperature | Operating temperature: 0°C to 50°C (32°F to 122°F) |
| Storage temperature: –40°C to +70°C (–40°F to +158°F) | |
| Humidity | Operating humidity: 10% to 90% RH (non-condensing) |
| Storage humidity: 5% to 95% RH (non-condensing) | |
| Altitude | Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
| Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) | |
| Mean time between failure (MTBF) | 200,000 hours (about 22 years) |
| Fan | 2 x pluggable fan modules |
| Fan redundancy | 1+1 redundancy |
| Heat dissipation | Fan cooling, front-to-rear airflow |
| Acoustic noise | ≤ 78 dB |
| Power module hot swapping | Supported |
| USB hot swapping | Supported |
| Cable hot swapping | Supported |
| Power supply monitoring | Monitoring of power supply model and status |
| Power supply failure alarming | |
| Fan monitoring | Fan speed regulating and alarm function |
| Temperature monitoring | Temperature alarming |
| ESD | ESD Contact/Air Discharge: 6kV/8kV |
| ESD Susceptibility Contact/Air Discharge: 8 kV/15kV | |
| Surge protection | MGMT port: 4 kV |
| Service port: 10 kV | |
| Power port: common mode 6 kV, differential mode 6 kV | |
| Conformal coating | Conformal coating supported (key components only) |
| Certifications and Regulatory Compliance | RG-CS86-20XS4VS2QXS-D |
| Safety regulation | IEC 62368-1 |
| EMC regulation | EN 300386, EN 55032 Class A, EN 55035, |
| EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, | |
| EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 | |
| Software Specifications | |
| RG-CS86-20XS4VS2QXS-D | |
| Feature | Description |
| Ethernet Switching | Jumbo frame (maximum length: 9,216 bytes) |
| IEEE 802.1Q (supporting 4K VLANs) | |
| Voice VLAN | |
| Super VLAN, private VLAN | |
| MAC VLAN, port-based VLAN, protocol-based VLAN, IP subnet-based VLAN | |
| GVRP | |
| Basic QinQ | |
| STP, RSTP, and MSTP | |
| ERPS (G.8032) | |
| LLDP/LLDP-MED | |
| LACP (IEEE 802.3ad) | |
| IP Service | ARP |
| DHCP client, DHCP relay, and DHCP server | |
| DHCP snooping | |
| DNS | |
| DHCPv6 client and DHCPv6 relay | |
| DHCPv6 snooping | |
| Neighbor Discovery (ND) and ND snooping | |
| IP Routing | Static routing |
| RIP and RIPng | |
| OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6 | |
| BGP4 and BGP4+ | |
| IPv4 and IPv6 VRF | |
| IPv4 and IPv6 PBR | |
| Equal and Weighted Cost Multi-Path (ECMP) | |
| Multicast | IGMP v1/v2/v3, and IGMP proxy |
| IGMP v1/v2/v3 snooping | |
| PIM-DM, PIM-SM, and PIM-SSM | |
| MSDP | |
| MLD v1/v2 | |
| MLD snooping v1/v2 | |
| PIM-SMv6 and PIM-SSM v6 | |
| IGMP filtering, IGMP immediate leave | |
| ACL and QoS | Standard IP ACLs |
| Extended IP ACLs | |
| Extended MAC ACLs | |
| Time-based ACLs | |
| Expert-level ACLs | |
| ACL80 | |
| IPv6 ACL | |
| ACL redirection | |
| Port traffic rate limiting | |
| Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ | |
| Congestion avoidance: tail drop, RED, and WRED | |
| 802.1p/DSCP/ToS traffic classification | |
| Eight priority queues per port | |
| Security | Multiple AAA modes |
| RADIUS and TACAS+ | |
| Port-based and MAC-based 802.1x authentication | |
| Web authentication | |
| HTTPS | |
| SSHv1, SSHv2 | |
| Global IP-MAC binding | |
| Port isolation and port security | |
| IP source guard | |
| SAVI | |
| CPP and NFPP | |
| Strict and loose RPF | |
| Reliability | REUP, RLDP, DLDP |
| IPv4 VRRP v2/v3 and IPv6 VRRP | |
| BFD | |
| Hot swapping of power modules and cables | |
| 3-level fan speed adjustment | |
| Fan fault alarm | |
| Device virtualization | VSU |
| NMS and maintenance | SPAN, RSPAN, and ERSPAN |
| sFlow | |
| NTP and SNTP | |
| FTP and TFTP | |
| SNMP v1/v2/v3 | |
| RMON (1, 2, 3, 9) | |
| Telnet | |
| NETCONF | |
| CWMP (TR-069) standard protocol | |
| gRPC | |
| Cloud and SON | |